Arsenal Feature Requests

This forum allows you to make and vote on features and support for controllers that you’d like to see in nativeKONTROL Arsenal products.

Please make sure to look through current requests (including Declined requests) before adding a new request.

Also, there is no need to vote on requests marked Planned. These will be implemented in a future version of Arsenal regardless of how many votes they receive.

Suggest a feature or request support for a controller

You've used all your votes and won't be able to post a new idea, but you can still search and comment on existing ideas.

There are two ways to get more votes:

  • When an admin closes an idea you've voted on, you'll get your votes back from that idea.
  • You can remove your votes from an open idea you support.
  • To see ideas you have already voted on, select the "My feedback" filter and select "My open ideas".
(thinking…)

Enter your idea and we'll search to see if someone has already suggested it.

If a similar idea already exists, you can support and comment on it.

If it doesn't exist, you can post your idea so others can support it.

Enter your idea and we'll search to see if someone has already suggested it.

  1. 0 votes
    Vote
    Sign in
    Check!
    (thinking…)
    Reset
    or sign in with
    • facebook
    • google
      Password icon
      I agree to the terms of service
      Signed in as (Sign out)
      You have left! (?) (thinking…)
      1 comment  ·  Admin →

      Unfortunately, it isn’t possible to do things like this with control surface scripts alone. Other software of some sort (such as MT Player) is needed. We do plan on adding in this sort of functionality, but it’s going to take some time to figure out the best approach as adding more software into the equation adds quite a bit of complexity and we’d like to minimize that as best as we can.

    • HazMap Track - optional modes with fewer or no button sliders.

      If I understand HazMap correctly, one mapped parameter occupies the entire column in the matrix, regardless of the nature of the parameter. I think it would be very useful with some new modes/sub modes. One mode would be geared more towards trigger fx (on/off), where all 64 pads could be mapped to their own respective parameters, and maybe a split mode, where the left half of the matrix would work like it does today (intelligent button sliders) and the right half would be 32 mappable pads. It would also be cool if the first of these two proposed modes could…

      1 vote
      Vote
      Sign in
      Check!
      (thinking…)
      Reset
      or sign in with
      • facebook
      • google
        Password icon
        I agree to the terms of service
        Signed in as (Sign out)
        You have left! (?) (thinking…)
      • 1 vote
        Vote
        Sign in
        Check!
        (thinking…)
        Reset
        or sign in with
        • facebook
        • google
          Password icon
          I agree to the terms of service
          Signed in as (Sign out)
          You have left! (?) (thinking…)
        • 4 votes
          Vote
          Sign in
          Check!
          (thinking…)
          Reset
          or sign in with
          • facebook
          • google
            Password icon
            I agree to the terms of service
            Signed in as (Sign out)
            You have left! (?) (thinking…)
            under review  ·  1 comment  ·  Admin →
          • Controller Support: KENTON KillaMix

            It is nice 9 Encoder / 9 Buttons controller

            1 vote
            Vote
            Sign in
            Check!
            (thinking…)
            Reset
            or sign in with
            • facebook
            • google
              Password icon
              I agree to the terms of service
              Signed in as (Sign out)
              You have left! (?) (thinking…)
            • 'Deactivate Notes for selected pad' button for monophonic sequencer

              If a clip contains notes that are both muted AND un-muted you can use the 'Deactivate Notes for selected pad' as a sort of A/B flip. As an example you could have two different kick patterns in the same clip, within the same note lane, and alternate between them with the 'Deactivate Notes for selected pad' button. The activated pattern would deactivate, and the deactivated notes would become active.

              It would be a button you could press and hold. While pressing and holding this button, when you press a pad to select it all the active notes corresponding to that…

              1 vote
              Vote
              Sign in
              Check!
              (thinking…)
              Reset
              or sign in with
              • facebook
              • google
                Password icon
                I agree to the terms of service
                Signed in as (Sign out)
                You have left! (?) (thinking…)
              • Modular Session_Split Mode or Variations

                A slew of _SPLIT Modes would be very useful.
                All the modes are so useful, more _split combos would be very helpful.
                Modular _splits would be epic for modes that are applicable, allowing for user customization.

                Examples:
                1. Mix_Meter SPLIT Mode (would be literally the best clip grid midi mixer on the market when using a controller with faders and grid such as LPC MINI.)
                Just think about how useful all those functions and visual feedback would be together on one page!

                2. Chop_Mix (view play location in clips and mix /mute /solo / arm controls all on the same…

                3 votes
                Vote
                Sign in
                Check!
                (thinking…)
                Reset
                or sign in with
                • facebook
                • google
                  Password icon
                  I agree to the terms of service
                  Signed in as (Sign out)
                  You have left! (?) (thinking…)
                • I would like to use Blink colors for Global user mode settings file

                  Typically I would like the button to blink when the loop is active.

                  1 vote
                  Vote
                  Sign in
                  Check!
                  (thinking…)
                  Reset
                  or sign in with
                  • facebook
                  • google
                    Password icon
                    I agree to the terms of service
                    Signed in as (Sign out)
                    You have left! (?) (thinking…)
                  • External App: ASCII key commands assignment

                    It would be great to be able to assign ASCII key commands to buttons in the Kaunch Control XL Arsenal scripts. This would mean we could trigger any function in Ableton to any free button.

                    There are some functions which aren't available in the ClyphX like "Command M" MIDI Map assignment for example. among many others.

                    1 vote
                    Vote
                    Sign in
                    Check!
                    (thinking…)
                    Reset
                    or sign in with
                    • facebook
                    • google
                      Password icon
                      I agree to the terms of service
                      Signed in as (Sign out)
                      You have left! (?) (thinking…)
                    • HazMap Track Modes: Add paged variant

                      This would allow for multiple pages of track-based HazMapping in each instance of a HazMap Track Mode.

                      2 votes
                      Vote
                      Sign in
                      Check!
                      (thinking…)
                      Reset
                      or sign in with
                      • facebook
                      • google
                        Password icon
                        I agree to the terms of service
                        Signed in as (Sign out)
                        You have left! (?) (thinking…)
                      • Ability to do Step Automation like in PXT Live

                        I would like to be able to use a step sequencer on the push 2 and automate parameters with step automation like in PXT Live on the Push 1. Extremely handy.

                        18 votes
                        Vote
                        Sign in
                        Check!
                        (thinking…)
                        Reset
                        or sign in with
                        • facebook
                        • google
                          Password icon
                          I agree to the terms of service
                          Signed in as (Sign out)
                          You have left! (?) (thinking…)
                        • matrix meter and fader improvements

                          - Velocity sensitive adjustment of faders on the matrix by holding a button and tapping the next button to send a value in between.
                          - For non-velocity matrix controllers, double buttons to access values in between the 8 buttons.
                          - Invisible faders on top of the meters in meter mode.

                          1 vote
                          Vote
                          Sign in
                          Check!
                          (thinking…)
                          Reset
                          or sign in with
                          • facebook
                          • google
                            Password icon
                            I agree to the terms of service
                            Signed in as (Sign out)
                            You have left! (?) (thinking…)
                          • Controller Support: general mackie control

                            an arsenal script which would work with any midi controller that supports the MCU protocol, and function exactly like the standard Live mackie interface would with that controller, but you could link it with other scripts.

                            4 votes
                            Vote
                            Sign in
                            Check!
                            (thinking…)
                            Reset
                            or sign in with
                            • facebook
                            • google
                              Password icon
                              I agree to the terms of service
                              Signed in as (Sign out)
                              You have left! (?) (thinking…)
                            • Create a new encoder mode for navigation

                              This feature is based on the "song mode" and "song order" features.
                              I would like to use a new navigation encoder mode to navigate in the whole set with :
                              - an encoder to jump by song cues
                              - an encoder to jump by inside-song cues (or all clues, if possible, using a modifier like shift )
                              - an encoder to jump by inside-song scenes (or all scenes, if possible, using shift a modifier like shift)

                              These encoders are mainly to be used in STOP mode. Immediate Jump is recommanded (no quantization).

                              3 votes
                              Vote
                              Sign in
                              Check!
                              (thinking…)
                              Reset
                              or sign in with
                              • facebook
                              • google
                                Password icon
                                I agree to the terms of service
                                Signed in as (Sign out)
                                You have left! (?) (thinking…)
                                under review  ·  1 comment  ·  Admin →
                              • Choose color for cues in Matrix Cue mode

                                I would like to choose a specific color for each displayed cue in Matrix Cue mode.

                                This is very helpful to identify a key event like song start or verse or chorus.
                                I would like to give each song a different color, and the same color code for chorus (red) and verse (blue) to all songs.

                                I suggest a global parameter editable by the user :
                                CUE_COLOR_${CUENAME_PREFIX}=$Color

                                For example :
                                CUE_COLOR_RED=Verse

                                ...would set to the red color all cues with name starting with "Verse".

                                For more general usability, I suggest using regular expressions matching (https://docs.python.org/2/library/re.html) or at least…

                                3 votes
                                Vote
                                Sign in
                                Check!
                                (thinking…)
                                Reset
                                or sign in with
                                • facebook
                                • google
                                  Password icon
                                  I agree to the terms of service
                                  Signed in as (Sign out)
                                  You have left! (?) (thinking…)
                                • Song mode : Identify Specific Cues for songs to split the whole set, and use them to filter Matrix modes

                                  I would like to split the whole set in songs. When playing a song I would like the matrix modes only to display elements related to the current playing song.

                                  To achieve this, I would like to filter cues related to song start time, for exemple with a prefix "s_".

                                  With two songs "song1" and "song2", I would create a cue for each at begin time named "s_song1" and "s_song2".
                                  When playgin song1, only the cues between 's_song1' and 's_song2' are displayed on the Matrix Cue Mode.
                                  In Matrix session mode, If I name a scene "s_song1" and another "s_song2",…

                                  0 votes
                                  Vote
                                  Sign in
                                  Check!
                                  (thinking…)
                                  Reset
                                  or sign in with
                                  • facebook
                                  • google
                                    Password icon
                                    I agree to the terms of service
                                    Signed in as (Sign out)
                                    You have left! (?) (thinking…)
                                  • Do not display all cues on the Matrix Cue Mode : only those filtered by name

                                    Not all the cues are relevant to be launched in Cue mode. Some cues can be used only as simple information or ClyphX X-Cues.

                                    A simple usage could be to previx with "_" the cues to be launched, and ignore the others.

                                    I suggest a global parameter editable by the user :
                                    FILTERED_CUES=_*

                                    For more general usability, I suggest using regular expressions matching (https://docs.python.org/2/library/re.html) or at least joker style : '_*', or name begin filter '_'.

                                    If not set, cue filtering is disabled.

                                    0 votes
                                    Vote
                                    Sign in
                                    Check!
                                    (thinking…)
                                    Reset
                                    or sign in with
                                    • facebook
                                    • google
                                      Password icon
                                      I agree to the terms of service
                                      Signed in as (Sign out)
                                      You have left! (?) (thinking…)
                                    • Controller Support: VCM-600

                                      The current ableton script for this controller only lets you modify 12 tracks, 6 at a time with a bank toggle button that lets you access the other 6.
                                      It would be amazing to be able to do navigation with this controller so you can use all the numerous knobs and faders to mix more than 12 tracks.

                                      1 vote
                                      Vote
                                      Sign in
                                      Check!
                                      (thinking…)
                                      Reset
                                      or sign in with
                                      • facebook
                                      • google
                                        Password icon
                                        I agree to the terms of service
                                        Signed in as (Sign out)
                                        You have left! (?) (thinking…)
                                      • Controller Support: Livid OHM RGB

                                        It would be nice to see the OHM included in arsenal, and also have access to the same robust type feature integration as what you guys have for the OHM64 the OMC product series.

                                        1 vote
                                        Vote
                                        Sign in
                                        Check!
                                        (thinking…)
                                        Reset
                                        or sign in with
                                        • facebook
                                        • google
                                          Password icon
                                          I agree to the terms of service
                                          Signed in as (Sign out)
                                          You have left! (?) (thinking…)
                                        • Hazmap Mix 2 : control 4 parameters in 2 tracks (ideal for djing) instead of 1 on 8 tracks

                                          I just discovered hazmapping and it's great ; what I would like to do is map 4 parameters (volume, one-knob filter, and 2 effects for exemple) on 2 tracks, this will create a good template for djing.

                                          4 votes
                                          Vote
                                          Sign in
                                          Check!
                                          (thinking…)
                                          Reset
                                          or sign in with
                                          • facebook
                                          • google
                                            Password icon
                                            I agree to the terms of service
                                            Signed in as (Sign out)
                                            You have left! (?) (thinking…)

                                            Each instance of the HazMap Mix Mode can control multiple parameters across 8 tracks. The number of parameters depends on the number of Encoder Accessory Buttons available. For example, you’d get 4 with the APC mini and 8 with the Push controllers.

                                            That said, it sounds like the mode already does what you need. If that isn’t the case, please clarify what it is that you’re trying to do that you’re unable to do with the mode currently.

                                          ← Previous 1 3
                                          • Don't see your idea?

                                          Arsenal Feature Requests

                                          Feedback and Knowledge Base