115 results found
-
Choose color for cues in Matrix Cue mode
I would like to choose a specific color for each displayed cue in Matrix Cue mode.
This is very helpful to identify a key event like song start or verse or chorus.
I would like to give each song a different color, and the same color code for chorus (red) and verse (blue) to all songs.I suggest a global parameter editable by the user :
CUECOLOR${CUENAME_PREFIX}=$ColorFor example :
CUECOLORRED=Verse...would set to the red color all cues with name starting with "Verse".
For more general usability, I suggest using regular expressions matching (https://docs.python.org/2/library/re.html…
3 votes -
Selection matrix mode
I would like a selection dashboard matrix for visual over-site and quick navigating in 2 layers. The first layer with track selection (around 24 or 32 tracks), some presets for the red box, and direct selection for 8 devices. And in the second layer the device selection stays, but the other pads change to direct device bank selections for several controllers.
3 votes -
Controller Support for NI komplete kontrol s49 mk2
the komplete kontrol s49 mk2 offers many possibilities, and with the NI software some things are possible.
but if you don't use the Komplete Kontrol plug in, it will quickly reach its limits.
I also feel that the potential of the screen has not been fully exploited3 votes -
Relative tracking for absolute controls
Arsenal seems to run on a few controllers that have encoders/faders that send absolute values (APCs, nanoKontrol, SL, etc.), although the script has the capacity to control parameters on a more relative basis. In the case of the APC mini, which I use, there are only absolute faders.
It would be awesome if there were an option to enable relative tracking for absolute controls. Combined with a momentary "Mute" button/button combination for those controls, it would be possible to use them just like endless encoders!
For the momentary "Mute" function, Shift could be used (thought it already modifies the encoder…
3 votes -
combo of cue and navigation mode
it would be great if there was a matrix mode mixed out of cue and navigation mode. in my imagination it would be the optimum if the button matrix normally works like in navigation mode, but when you press shift you can select cues and the matrix accessory function as a visual metronome and when you hold shift you can add, delete,... cues (exactly like in cue mode)
3 votes -
fixed length options @ global user mode
Please add fixed length options, with similar functionality to
GLOBAL QandREC Q- e.g.
FIXED 1 BAR,FIXED 3 BARS - LED feedback for with
ONstate for activeFIXEDcontrol andOFFstate for all otherFIXEDcontrols.
This was also brought up by another user @ https://forum.nativekontrol.com/thread/4051/global-user-mode-queries
3 votes - e.g.
-
3 votes
-
Alternative launch quantize values for SESSION_SNAP
It would be very welcome to use at least a few of the accessory buttons on the Launchpad to change the launch quantize for the Session snapshots (without changing the GQ). The select few values could be specified in settings.
2 votes -
Arsenal script for AKAI Professional MPK Mini MK3
Nice portable device with 8 knobs, 8 pads (with a toggle button to access a second pad bank) and a small screen.
2 votes -
HazMap Track Modes: Add paged variant
This would allow for multiple pages of track-based HazMapping in each instance of a HazMap Track Mode.
2 votes -
Controller Support: Livid OHM RGB
It would be nice to see the OHM included in arsenal, and also have access to the same robust type feature integration as what you guys have for the OHM64 the OMC product series.
2 votes -
momentary macro control of matrix mode
for example,
on launchpad, when i use device mode,
if i press button to go value 127, it's go yes.
but for using "beat repeat grid parameter",
after holding 127 , then going back to 0 (zero) value,
it will be really convinent.
my request means momentary macro value when i do holding down,
then go back 0 .2 votesIt wouldn’t be possible to do this in Device Mode, but it may be possible to offer an alternate mode of some sort that could do it.
-
NK1: better use of the FWD/RWD buttons (alternatively as option)
I've never used the forward/backward buttons on any controller I've owned, and I'd really like these buttons on the NanoKontrol to do things like activate/deactivate loop, activate/deactivate overdub and, via SHIFT, activate/deactivate metronome and activate/deactivate global record.
1 vote -
HazMap Track - optional modes with fewer or no button sliders.
If I understand HazMap correctly, one mapped parameter occupies the entire column in the matrix, regardless of the nature of the parameter. I think it would be very useful with some new modes/sub modes. One mode would be geared more towards trigger fx (on/off), where all 64 pads could be mapped to their own respective parameters, and maybe a split mode, where the left half of the matrix would work like it does today (intelligent button sliders) and the right half would be 32 mappable pads. It would also be cool if the first of these two proposed modes could…
1 vote -
'Deactivate Notes for selected pad' button for monophonic sequencer
If a clip contains notes that are both muted AND un-muted you can use the 'Deactivate Notes for selected pad' as a sort of A/B flip. As an example you could have two different kick patterns in the same clip, within the same note lane, and alternate between them with the 'Deactivate Notes for selected pad' button. The activated pattern would deactivate, and the deactivated notes would become active.
It would be a button you could press and hold. While pressing and holding this button, when you press a pad to select it all the active notes corresponding to that…
1 vote -
LP1: Include surface switching option like LPC-Live 2 has
This would allow the Launchpad to be used with the all of the various M4L devices created for it without the devices needing to be modified.
1 vote -
Clip Play Poly Mode optional layout and functions
In order to have more subdivisions on the polymodes, instead of the columns, each row in the matrx will control either the Clip that is playing or the Clip that is selected on the corresponding Track. (Each row would be related to first 4 or 5 tacks in the grid selector)
On poly submodes the matrix accessory buttons would be used to select and show the playing clip of the corresponding track.
Shift+ matrix accessory buttons: Quantization
Loop and Play toggle buttons:when holding these and pressing the matrix accessory buttons would toggle play/stop and loop of the corresponding track.
1 voteAdmin note: Modified title of idea as, if it were implemented, it would apply to all Arsenal scripts with a matrix, not just Arsenal_AP4.
-
Song Navigation mode: setting loop markers
In song nav mode, the top four accessory buttons are the metronome, so the bottom one, unused, could be loop on/off, and then you'd be able to select a loop range on the matrix just like in the sequencer modes. Another idea I have would be that you could hold shift, press the button at the beginning of your loop, then move the loop elsewhere by pressing another button and the loop stays the same length.
1 vote -
ability to set fixed length's length on Session_Record mode or somewhere
for example,
LP2 , when i holding mixer button, if the scene launch button will be changed to fixed length value setting , it will be good.1 voteThis may be possible. In the interim though, you can control fixed length settings via Global User Mode.
-
Arsenal_LPP: note sub-divisions in the mono sequencer
The Double button could be used, while held down, to put ratcheted notes in the sequencer, and the number of repetitions could be selected with the Scene buttons, also with Double held down.
1 vote
- Don't see your idea?