Shift State Session Navigation in Mixer and Meter Modes
One has to switch to session mode and press shift to move the mixer and meter mode grid over by 8 tracks and then back to Meter or Mixer mode.
Since work is done in Mixer & Meter mode in groups of eight, maybe the arrows in Mix and Meter Mode could become 'bank by 8' arrows?
Left moves grid left 8 steps, right moves grid right 8 steps, etc...
An option to switch arrows from single track movement to bank x8 movement would be excellent.
If the controller has dedicated arrow buttons, then shift + the arrow buttons will move in increments of 8 in these modes.
If the controller doesn’t have dedicated arrow buttons, I suppose an option could be doable. However, that option would likely affect all modes that navigate the grid selector. Would that be suitable?
Holding shift with dedicated buttons would be okay.
The point for me, is to remove the shift all together for movement if you only want to bank by 8.
Which is all I do, and what I see others do as well.
Would this affect instrument grid modes that address single instruments as well?
I do not use this script for instrumentation, but it seems an option would cover most needs.
The option affecting all other modes is not a problem, from the point of view from my usage patterns.